Guide On How To Unbrick a Bricked Tecno W4 [Stock ROM Download]

This post contain a full guide on how you can use a stock rom to unbrick or restore the Android smartphone back to normal. 

Tecno W4 Android smartphone  was popularly known to be the first Tecno device to run 6.0 Marshmallow operating system out of box. The smartphone also features 1GB Ram and 16GB expandable internal memory with 8mp rear camera and 5 inches high definition screen.

Tecno W4 unbrick and stock rom
Tecno W4 

Tecno W4 Android smartphone has been on sales few months ago but you’re still wondering if you can get the phone here is the Full Phone Specifications and Price of Tecno W4.

I will share with you today an essential guide on how to unbrick a bricked Tecno w4 smartphone using the official Android 6.0 Marshmallow stock firmware. Continue with guide below to put live to your brick Tecno W4 Android smartphone.

◾SP Flash tools (Download)
VCOM drivers 
◾Tecno W4 Stock ROM (Download)
◾USB cable for communicating the device with your PC.

Steps On How to Flash Tecno W4 to Stock Android 6.0 Firmware.

Step 1: First download the Stock ROM file from the link provided above, and then extract the “Tecno W4 stock firmware” folder to the desktop screen of your computer.

Step 2: Now, power off your Tecno W4 device (if it’s a bricked device simply hold the power button to power off).

Step 3: Next, download the SP Flash tool, and extract the files to your computer. You should get the following files as seen below, after extraction.

Step 4: From the extracted files, open Flash_tool.exe

Step 5: Once the flash tool is launched, then click on the download/upgrade tab and click on scatter loading button.

Step 6: Now, locate the “MT6580_Android_Scatter.txt” file, which is on your desktop, also endeavor to click on the “Format All + Download” option just as circled in the image below.
Step 7: After that, click download to begin flashing process, as circled in the image below.

Step 8: Immediately, connect your device to your computer via USB cable, and press Volume Down or up key, so it would be detected easily by your computer.

Step 9: The Flashing process would be in progress, and a Green button would appear once the process is completed.
This is how to unbrick and flash stock rom on Tecno W4 Android smartphone, if you encounter any problems doing this always use of comments box below.

Leave A Reply

%d bloggers like this: