How To Unbrick A Bricked Tecno Boom J8 [Stock ROM Download]

1
If you Bricked your Tecno Boom J8 Android Phone don’t panic

Just follow the the Simple Steps Below 

 Tecno Boom J8 Android smartphone  was released few months ago, out of the box with 6.0 Marshmallow operating system. The smartphone also features 2GB Ram and 16GB expandable internal memory with 13mp rear camera and 5.5 inches high definition screen.

unbrick a bricked tecno Boom J8 Here are essential guide on how to unbrick a bricked Tecno Boom J8 smartphone using the official Android 6.0 Marshmallow stock firmware. Continue with guide below to put live to your brick Tecno Boom J8 Android smartphone

REQUIREMENT TO UNBRICK YOUR TECNO Boom J8

◾SP Flash tools Download Any Version of SP Flash Tool Here. Here’s how to use Sp flash tools
◾VCOM drivers 10 Quick Steps to download and Install MediaTek USB VCOM Drivers
◾Tecno Boom J8 Stock ROM Download
◾USB cable for communicating the device with your PC.

Steps On How to Flash Tecno Boom J8 to Stock Android 6.0 Firmware.

Step 1: First download the Stock ROM file from the link provided above, and then extract the “Tecno Boom J8 stock firmware folder to the desktop screen of your computer.

Step 2: Now, power off your Tecno Boom J8 device (if it’s a bricked device simply hold the power button to power off).

Step 3: Next, download the SP Flash tool, and extract the files to your computer. You should get the following files as seen below, after extraction.

unbrick a bricked tecno Boom J8

Step 4: From the extracted files, open Flash_tool.exe

Step 5: Once the flash tool is launched, then click on the download/upgrade tab and click on scatter loading button.

Step 6: Now, locate the “MT6735_Android_Scatter.txt” file, which is on your desktop, also endeavor to click on the “Format All + Download” option just as circled in the image below.

unbrick a bricked tecno Boom J8

Step 7: After that, click download to begin flashing process, as circled in the image below.

Step 8: Immediately, connect your device to your computer via USB cable, and press Volume Down or up key, so it would be detected easily by your computer.

Step 9: The Flashing process would be in progress, and a Green button would appear once the process is completed.1

This is how to unbrick and flash stock rom on Tecno Boom J8 Android smartphone, if you encounter any problems doing this always use of comments box below

http://feeds.feedburner.com/9japage
Share.

1 Comment

Leave A Reply

%d bloggers like this: